Depth Filter Cartridges Deep Filtration
Depth Filter Cartridges Deep filtration
Deep filter in the life is very common in industrial production activities will be used. In fact, the depth of the filter is the filter manufacturers to produce a cylindrical device, used to filter, it is removable, the top and bottom of the tube closed, surrounded by a filter medium. Generally installed a deep filter device is the filter, is used to filter the dust of heavy dust.
Deep filter filter is a deep filter, characterized by the suspension of the solid particles smaller than the filter medium pore diameter, particle filter is through the filter medium within the elongated curved holes and fluid collision and extrusion effect was intertwined and attached to the channel On the wall.
Deep filter is suitable for use in the suspension of small particles and little content of the occasion, the general solid content of not more than 0.01%. Removal of 0.02-100um of solid particles. Mainly used to remove the general sand filter can not remove the small suspended particles and colloidal substances, such as drinking water purification.
Deep filter can: with acid, alkali, temperature, wear and so on.
The use of deep filter: for mining, petroleum, chemical, food, medicine, machinery manufacturing and other industries. The function of the molten wire is filtered and the flow resistance is increased by filtering the mechanical impurities and improving the effect of mixing or plasticizing.
Deep filter features: direct filtration, simple process, good air permeability, uniformity and stability, no leakage, good regeneration performance, regeneration speed, easy installation, high efficiency, long service life.
Deep filter use: purifier, air filter, dehumidifier, and dust, etc., for a variety of different filtration, dust and separation requirements for petroleum, chemical, mineral, food, pharmaceutical and other industries filter The Now the use of filters more and more widely, the general family will often be used. Deep filter commonly used automatic cleaning methods are high-pressure gas pulse backflush, mechanical vibration. Pulse backlash is the use of pre-set parameters of the controller to the solenoid valve a signal, and instantly open and close the solenoid valve diaphragm, so that high-pressure gas into the injection tube, the use of rapid expansion of the gas force to shake the depth of the filter surface dust, the general gas pressure We set it to about 6 kg. Mechanical vibration cleaning is often used in small single-plane depth filter dust collector, it is the use of dust collector eccentric device generated by the jitter force to clean, this action needs to stop after the operation.