Type A Type B
Rated voltage: 220V
Voltage withstand voltage: 1.5kv
Insulation resistance: > 5MΩ
Insulation material: (silicone rubber)
Ambient temperature: -60 ℃ - +250 ℃
Operating temperature: 0-150 ℃
Display mode: Heating temperature - red LED,
Set temperature - green LED
Sensor: Type K thermocouple or PT100
1. Electric heating plate power section decreases. - control the filter temperature difference caused by excessive temperature above or below the condensation or over-temperature damage.
2. Built-in over-temperature circuit breaker (heating temperature exceeds 140 ℃) - to prevent instrument failure \ line fault abnormal temperature damage filter.
3. Electric heating sleeve using porous polymer insulation - full energy saving, heating the outer surface of the set at room temperature.
4. Stereotyped magic sticky buckle design, Teflon coated - easy to disassemble, install.
5. intelligent double-three display temperature control system, heating temperature can be adjusted at 0-150 ℃.
Pure water tank, injection water tank, ingredients tank and other products of the respirator to prevent heat insulation filter to form condensed water.
Freeze-Dryer Gassing Filter - Removal of Condensate after Steam Sterilization Residual or Integrity Tested Moisture
Raw materials and finished liquid filter heating insulation filter drying and so on.
Welcome to wholesale high quality teflon vent filters from Tanvi Filtering which is well-known as one of the leading manufacturers in China. Our factory have been engaged in offering special filtering products with high security, reliable performance and high filtering accuracy for over 8 years. Now, take action wholesale cheap our products.